All Products

Liquid silicone injection molding custom

The silicone material has stable chemical properties, so the silicone products produced have a long service life and are not easily damaged, and the flexibility of these products is excellent and not easily deformed. Belongs to:Injection Molding,...

Diy silicone injection molding service

After the inspection, the packaging department will stop packaging according to the customer's requirements. Usually each pack and 10 packs per box, or 20 packs per box, according to customer requirements to stop boxing. After the packaging is...

Arburg silicone injection molding parts

We will compare the customer's requirements in the first instance and confirm that they are met before making a proof. Belongs to:Injection Molding, ABS Injection Molding Hot Products:CNC Machining, Forgings Or Casting, Injection Molding Product...

Liquid silicone injection molding process

Due to the nature of the material, silicone products have a strong ability to resist radiation, and have a good weather resistance is not easily affected by the environment, high stability. Belongs to:Injection Molding, ABS Injection Molding Hot...

Small silicone injection molding High Quality

The production of silicone products is a complex process and the quality is good or bad in addition to machine and human factors. Intermediate checks are the key to identifying and solving major product quality problems. We inspect every 2 hours...

Medical silicone injection molding service

Silicone moulds are made from silicone, which is used as a raw material to make products quickly through a certain moulding process. Also because silicone is non-toxic and green, it is increasingly popular because of its good environmental...

Polypropylene injection molding service

Advantages of PP 1、High hardness and high melting point. 2、Lower heat distortion temperature (100℃), low transparency, low gloss, low rigidity． 3、High impact strength, the strength of PP increases with the increase of ethylene content. Belongs...

abs injection molding parts manufactory

ABS molding shrinkage is small, easy to melt cracking, resulting in stress concentration, we should anneal the plastic parts after molding, and strictly control the molding conditions; Belongs to:Injection Molding, ABS Injection Molding Product...

High precision cnc aluminum machining parts

Material: 20crmoti Features: mold steel, carburizing and heat treatment process performance is good, in the commonly used carburizing temperature under long-term heating, no grain growth tendency, quenched residual austenite is very little, so there...

Custom cnc machining stainless steel

This product material is 304 stainless steel, a viable alloy material for a variety of aerospace components and has been used in aerospace applications for decades. Stainless steels are resistant to corrosion and high temperature oxidation as their...

Cnc machining for aerospace parts

CNC turning enables the manufacture of multiple parts to interact perfectly. Excess material and rotating material can be cut at high speed. The accuracy of this machine is less than 10 microns. We work from design drawings to ensure that the CNC...

CNC Stainless Steel Custom parts

CNC machining technology has been developed rapidly. Due to the increasing maturity of CNC machining technology, it has led to its irreplaceable role and significance in the development process of the aviation manufacturing industry. Technological...

Milling 304 stainless steel

When external round turning is carried out, the borders of the tool are subject to severe wear during machining due to the round state of the incoming part and the heat treatment oxide layer on the surface. A carbide coated tool was selected by...

Cnc stainless steel cutting

The original processing of small and medium-sized parts of the aero-engine only stays in stand-alone processing, because it is not the same as the parts of the car, the parts of the car are in larger batches, but the parts of the aircraft engine are...

Cnc stainless steel machining

This is a stainless steel part machined on a CNC lathe and used in the aerospace industry. Modern aircraft have long life and high reliability requirements, which makes the quality control of the parts more stringent. Belongs to CNC Machining,...

High precision cnc stainless steel machining parts

To ensure the accuracy of machining. In the roughing stage, the machine can be suspended for chip breaking, and in the fine machining stage, chip breaking slots are added to the machine with high speed rotary cutters to deal with tangled chips....

newly design helicopter metal parts

In the production of aero-engines, the parts produced are mainly test parts for small batches, so the engine parts need to be machined to ensure that the dimensions are accurate. This is achieved through the automatic adjustment of the length of the...

Batch cnc of metal parts for aerospace equipment

Nowadays, the positioning accuracy of China's machine tool processing equipment is less than 0.01mm, which is at an advanced level. Our company controls the precision to 0.02mm. Belongs to CNC Machining, Precision Turning, Stainless Steel Parts...

custom made 304 stainless steel turning

This is very typical of turned parts. The raw material is 304 stainless steel, which has good corrosion resistance, heat resistance and stamping and bending properties, high toughness, no heat treatment hardening and long service life. This is used...

gear case parts Gear processing

This product is used for the accessories of Geely Automobile gearbox. We got the raw material 20crmoti from a high-quality supplier in China, processed it with a CNC lathe, and then carved out the outer diameter shape with wire cutting and central...

cnc stainless steel machining gearbox

20CRMNTI is a carburized steel with a carbon content of 0.17%-0.24%. It is a medium liquefied carburizing steel in medium - quench-studdability crmnti steel. It is mainly used in the manufacture of transmissions for automobiles. Product Details

CNC Machined joints in Aero

This is the accessory in the rocket. The material is high temperature alloy steel. Some details require high tolerances. We have done thorough research on knives, experience, etc., and completed it smoothly. Products are recognized by customers....

Cold stamping metal parts for OEM

Cold stamped parts generally do not undergo any cutting process, or only require a small amount of cutting process. The accuracy and surface condition of hot stamped parts are lower than that of cold stamped parts, but still better than castings and...

custom sheet metal brass stamping parts

During the stamping process, the surface of the material is not damaged, so it has good surface quality and a smooth and beautiful appearance, which provides convenient conditions for surface painting, electroplating, phosphating and other surface...