All Products

Electric Standing Desk Frame Dual Motor 2 Columns

FY-822 is a dual motor standing desk leg with 2 Columns. Compared with a single motor, the power of the dual motor is higher and the load capacity is better. The lifting is stable and more durable. The noise can be lower than 45db, which is a very...

Four legs Electric Desk 3 segments

4 Legs electric standing desk is the most common office furniture, can be used by two people at the same time. Product Parameter Model: FY-843 Motors: Four Motor Height Range: 610mm-1250mm Speed: 35mm/s Extention Range: 1000mm-1800mm Noise:...

high precision machining transmission case

The gearbox of a car can change the transmission ratio to expand the torque and speed range of the driving wheels. This is a transmission gear fitting. High hardness is required. Belongs to CNC Machining, Precision Turning, Aluminium Parts,Auto...

Cnc machining aerospace parts

A key part of aerospace engineering is materials selection. Aerospace manufacturing requires materials with exceptional strength, reliability and wear resistance to ensure they are ready for changing conditions and demanding structural loads. Our...

Auto parts cnc machining turning

Auto parts processing refers to cylinder block, cylinder head, crank, connecting rod, etc. Most of the machine tools required for processing connecting rod, connecting rod, connecting rod, connecting rod, connecting rod and spare parts are...

high precision machining gear

This is a gearbox part. The material is 20CrMnTi, which is the steel for surface carburizing and hardening. It has good workability, minimal processing deformation and good fatigue resistance. The main applications are: for shaft, piston parts and...

High Quality Plastic Outdoor Plastic lampshade

ABS materials offer superb processability, cosmetic properties, low creep and excellent dimensional stability as well as high impact strength. This gives it great flexibility in product design. It can be made into a variety of shapes. Belongs...

Customized High Precision Injection molding parts

This product is a lampshade made of plastic, the material is ABS, which is malleable, in addition, ABS material products are mainly used in shells, mechanical parts, car parts, etc. Belongs to:Injection Molding, ABS Injection Molding Hot Products:...

New Design Electronic Device Casing Plastic

ABS engineering plastics are highly economical due to the fact that injection moulding processes not only produce large quantities, but can also be produced in batches, continuously and with stable dimensions, making it easy to automate and speed up...

Plastic cover of lamp mass production

ABS is a thermoplastic. Injection moulding is an important method for the production of thermoplastic products. It is also the tool that gives plastic products their complete structure and precise dimensions. Injection moulding is a processing...

Good design Injection molding parts

We dry the ABS plastic pellets in hot air at 80-90°C for 4 hours before injection moulding. The adequate drying process guarantees its precision. Belongs to:Injection Molding, ABS Injection Molding Hot Products: CNC Machining, Forgings Or Casting,...

High Quality Plastic Mold Injection Molding Parts

ABS plastic is a terpolymer of three monomers: acrylonitrile (A), butadiene (B) and phenethyl (S). ABS plastic is a tough, hard and rigid material with easy access to raw materials, good overall performance, low price and wide use. ABS plastics are...

OEM Electronic Housing Injection Molding Parts

ABS is characterised by its thermal and mechanical properties, of which it has a high thermal deflection temperature, a wide temperature range and a much smaller coefficient of thermal expansion than conventional materials. In terms of mechanical...

Precision ABS+PC Plastic injection

ABS resin is a slightly yellow solid with a certain toughness and a density of about 1.04~1.06 g/cm3. It is relatively resistant to corrosion by acids, alkalis and salts and can also withstand organic solvent dissolution to a certain extent. ABS...

ABS plastic injection molding parts custom

ABS is an engineering plastic, characterised by its general properties, its appearance is opaque and ivory coloured granules, its products are colourful and have a high gloss, its relative density is about 1.05 and its water absorption rate is low....

Injection molding parts abs CUSTOM

ABS has a heat deflection temperature of 93 to 118, which can be increased by about 10C after annealing, and can be used in a temperature range of -40 to 100°C. Belongs to:Injection Molding, ABS Injection Molding Hot Products: CNC Machining,...

Professional Injection molding parts custom

This product is made of ABS, a hard material with strong impact resistance, scratch resistance and dimensional stability, as well as being moisture resistant, corrosion resistant and easy to process, making it an ideal material for the sheet...

OEM Injection molding parts ABS

After injection moulding of the hardware, the mobile phone casing (ABS material) is sprayed with silver paint and dried before being assembled with other plastic and hardware parts. Belongs to:Injection Molding, ABS Injection Molding Hot Products:...

ABS plastic injection molding parts

This product material is ABS. abs material has very good light transmission, compared with the same transparency of acrylic, although more very tough, but the price is relatively high, and the colour is not as much as the colour of acrylic,...

abs and plastic customized logo

ABS has excellent mechanical properties, its impact strength is excellent and it can be used at very low temperatures: ABS has excellent wear resistance, good dimensional stability and oil resistance, and can be used for bearings under medium loads...

Abs+pc plastic injection plastic case

Because PC/ABS is a mixture of two polymers, mainly PC, in the processing of finished products, sometimes also found in the sprue showing the scene of the speckle, usually because of high speed when the needle, molten material expanded into the...

Professional custom plastic injection mold service

The material of this product is ABS. abs material is very environmentally friendly, because of the use of environmentally friendly chemicals, so there is no toxicity and no smell, but also can and electrical insulation, is a very safe material....

Polypropylene injection molding Machining Service

This is an injection moulded shaped part made of PP, which is wear and impact resistant and can be used for various parts. Belongs to:Injection Molding, Polypropylene Injection Molding Hot Products: CNC Machining, Forgings Or Casting, Injection...

Polypropylene injection molding cost custom

PP sheet is modified by adding glass fibres, metal additives or thermoplastic rubber. The flow rate MFR ranges from 1 to 40 and the impact resistance of low MFR PP materials is better but the ductility is lower. Therefore, there is usually no...